| AD CATEGORY :: Engines :: Engines & Components |
Ad #1269012 Posted:2008-09-14 08:00:07
This ad expired 47 days ago.
70'-76' Chevy 400 small block
Remanufactured Chevy 400 Stock engin
$1,500.00
******COMPLETLY REMANUFACTURED******
New Cam Bearings
New Cam Shaft
New Main Bearings
New Oil Pump
New Rod & Main Bearings
New Pistons
New Rings
New Timing Components
New Freeze Plugs
New Gasket Set
All our engines come with a 1 year Warranty on parts!!!
No core needed!!!
Process of the Engine Block
1.Engines are oven baked,magma fluxed, shot
blasted,and jet washed, to remove rust and
scale.
2.Bolt holes are inspected and repaired if
needed.
3. Lifter bores are checked for size and fit prior
to roller burnishing.
4. Cylinder walls are bored to match piston
set,precision surfaced with our diamond hone
to uniform cross hatch pattern,creating
support for lubricating oil film and creating a
micro-finish.
5. Demagnetized prior to final cleaning before
assembly.
6. Rods checked for bends and reconditioned.
Process of the Remanufactured Cylinder Head
1.Cylinder heads are oven baked,magma
fluxed, shot blasted, and jet washed, to
remove carbon, oil,residue,rust and scale.
2. Cylinder head is Magma fluxed or
pressure-tested to identify and correct all
cracks and flaws.
3. Valve seats are machine cut to a triple angle
(all three angles cut simultaneously) with the
latest state of the art machinery.
4. Resurface mill.
5. Guides are checked and replaced or
new,over-size valves are use to provide better
fit and oil control.
6. Valve stems are centerless ground, refaced,
butt-end cut and chamfered.
7.All cylinder heads are vacumn tested to
ensure proper valve sealing.
Process of the Remanufactured Crankshafts
1.Each crankshaft is first thoroughly cleaned. It is inspected not once,
but three times, for warping cracks and other minute imperfections.
2.Abana slowly regrinds each crankshaft to insure exact dimensions.
All bearing surfaces - main and rod journals and thrust surfaces -
are precision machined to an 8-12 micro inch finish.
CONTACT:
PHONE: 305-827-4744
EMAIL: javierggandia@yahoo.com
WEBSITE: WWW.ABANAENGINE.COM
ABANA ENGINE REBUILDERS
1051 E 27TH STREET
HIALEAH, FL.33013
New Cam Bearings
New Cam Shaft
New Main Bearings
New Oil Pump
New Rod & Main Bearings
New Pistons
New Rings
New Timing Components
New Freeze Plugs
New Gasket Set
All our engines come with a 1 year Warranty on parts!!!
No core needed!!!
Process of the Engine Block
1.Engines are oven baked,magma fluxed, shot
blasted,and jet washed, to remove rust and
scale.
2.Bolt holes are inspected and repaired if
needed.
3. Lifter bores are checked for size and fit prior
to roller burnishing.
4. Cylinder walls are bored to match piston
set,precision surfaced with our diamond hone
to uniform cross hatch pattern,creating
support for lubricating oil film and creating a
micro-finish.
5. Demagnetized prior to final cleaning before
assembly.
6. Rods checked for bends and reconditioned.
Process of the Remanufactured Cylinder Head
1.Cylinder heads are oven baked,magma
fluxed, shot blasted, and jet washed, to
remove carbon, oil,residue,rust and scale.
2. Cylinder head is Magma fluxed or
pressure-tested to identify and correct all
cracks and flaws.
3. Valve seats are machine cut to a triple angle
(all three angles cut simultaneously) with the
latest state of the art machinery.
4. Resurface mill.
5. Guides are checked and replaced or
new,over-size valves are use to provide better
fit and oil control.
6. Valve stems are centerless ground, refaced,
butt-end cut and chamfered.
7.All cylinder heads are vacumn tested to
ensure proper valve sealing.
Process of the Remanufactured Crankshafts
1.Each crankshaft is first thoroughly cleaned. It is inspected not once,
but three times, for warping cracks and other minute imperfections.
2.Abana slowly regrinds each crankshaft to insure exact dimensions.
All bearing surfaces - main and rod journals and thrust surfaces -
are precision machined to an 8-12 micro inch finish.
CONTACT:
PHONE: 305-827-4744
EMAIL: javierggandia@yahoo.com
WEBSITE: WWW.ABANAENGINE.COM
ABANA ENGINE REBUILDERS
1051 E 27TH STREET
HIALEAH, FL.33013
This item is USED
Trades NOT ACCEPTED
Payment options:
 |
 |
 |
Item Location: HIALEAH, FL Get Directions
Instructions for buyer: For shipping out of state please contact me at 305-827-4744 or email me at javierggandia@yahoo.com
This ad expired 47 days ago.
Ad posted by: AbanaEngines (#307520)
RaceSpace Profile: View
Member Since: 2008-07-23
Number of Honor Payments: 0
Average Accepted Sale Price: $0.00
Average Honor Payment: $0.00
Phone Number: 3058274744
- Member has no other classified ads.
RESOURCE LINKS
| Home | Classifieds | About | Contact | Store | Advertise | Affiliate Program | Pricing Guide | FAQ | Send Link to a Friend |
|
Copyright ©2005 RacewayMedia LLC All Rights Reserved.
Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacewayMedia LLC Terms, Classified Guidelines and Privacy Policy |
|
Raceway Media, LLC
PO Box 491, North Adams, MA 01247 Tel: 413.663.3496 • Fax: 413.663.3615 • Email: support@racingjunk.com |
|
Execution Time: 615 ms |